PROTECT 1207I RF Detector

DETECTOR OF MOBILE AND WIRELESS SIGNAL

Able to detect mobile and wireless signals at a much greater distance compared to conventional RF detectors (at least,10 times more)

Selective: interference resistant and with a high sensitivity

Has worldwide coverage of mobile standards – can detect all existing bands of GSM, CDMA, 3G, 4G/LTE and 5G in the range up to 6 GHz

Able to detect all types of wireless signals,including Wi-Fi 2.4 GHz, Bluetooth, Wi-Fi 5 GHz, DECT, ISM 434MHz, ISM 968 MHz and ISM 915 MHz

Detection of at least 26 mobile and wireless bands

Can be adjusted to the frequency allocation of the country of use

A selective multi-band principle of work informs the user of exactly which signals were found

The mode of analysis of a certain band facilitates the physical search of a transmitter

A separate mode for the detection of GPS trackers with history accumulation (TRACKER)

ALARM function warns the operator about exceeding the threshold, both with sound and visually

43 threshold levels for setting optimal sensitivity

Can be set up for specific tasks, for example, for the detection of Wi-Fi only, etc.

Two antenna inputs and two antennas in the set for ensuring maximum sensitivity

The high-band directional antenna facilitates locating of transmitters above 2400 MHz

The built-in rechargeable battery provides an operational time of up to 5 hours

USB recharging

Specification

Number of bands: 26

Antenna inputs:

Input 1: SMA, 2400 – 6000 MHz

Input 2: SMA, 600 – 2400 MHz

Operation modes:

  • ALL BANDS (detection on all bands)
  • GROUP (detection on the selected group of bands)
  • BAND (analysis of a separate band)
  • TRACKER (detection of GPS trackers)

Alarm function: Visual or audio

Number of alarm threshold levels: 43

Sound signals: Alarm, depression of buttons

Regions:

  • US (bands of the USA)
  • EU (European bands)
  • TOTAL (all bands)

Operating and control elements:

  • Joystick: move left-right, up-down, threshold adjustment, mode selection
  • Button POWER OFF: switch off
  • Button POWER ON: switch on
  • Button ALARM: alarm
  • Button AUDIO: sound
  • Button BANDS: band set up
  • Button BACK: exit to the previous mode
  • Button SAVE (storing the current state)

Power supply source: USB 5V

Power: Built-in rechargeable battery 6800 mA*h 3.7 V

Battery operational resource: Up to 5 hours

Mass:

  • The device without antenna: 750 g
  •  Packed: 1500 g

Dimensions:

  •  The device without antenna: 208 x 86 x 41mm
  •  Packed: 27 x 22 x 10 cm

Operating temperature range: -5…50 °C

 

Supplied set

Device

High-band antenna Micro-Pointer LPDA-12

Low-band rod antenna

Charging cable USB Type C

2 x Angle adapter SMA

A case for transportation

User’s Manual




Login to webshop
Prices may be changed at any time without further notice

Sales

Olli Turtiainen, Product Group Manager

CCTV & Measuring instruments

+358 10 400 1296

Email
Rolle Tenho, Technical sales

Kameravalvonta ja mittalaitteet

+358 10 400 1601

Email

Pyydä tarjous

Tuotenumero:

Istuntosi on vanhentunut, ole hyvä ja kirjaudu uudelleen